Precision Metal Fabrication
Shopping CartShopping Cart -0item(s)/Total: $0
Home > Ford > 2011-2016 F-250/350 > Individual Components and Upgrades

2005-17 Ford F-250/350 HD Dual Stabilizer Kit

Part Number PMF-FRD-3010
review 5 Review(s)
5
2005-17 Ford F-250/350 HD Dual Stabilizer Kit
Shown mounted below for stock height trucks
Email a friend Email a friend
Write a Review Write a Review
Price
Your Price:  
$199.99
Choose Options
Shock Options
No Shocks, BRACKETS ONLY!!
Bilstein 5100's [+$100.00]
Fox 2.0 IFP [+$278.00]
King 2.0 [+$468.00]
Truck Height
1" Lowered up to 1" of Lift
1.5" Lift or Higher
Quantity
Description
  PMF is proud to offer our dual opposed steering stabilizer kit for 2005-2017 Ford F-250/350 4x4 trucks (does not include WideTrack equipped vehicles).  This kit is entirely bolt on with your choice of stabilizer options!  With the ability to mount the stabilizer shocks above or below the center mount this can be used on both stock height and lifted trucks alike.  You will notice a smoother steering wheel and less road input when hitting potholes and road imperfections.  The decreased shock load on steering and track bar components will help longevity of all of these pieces.

This kit is gusseted both top and bottom to give a solid center mount. To which Bilstein 5100 series dampeners are mounted.  There are two mounting options for the stabilizer.  They can either be mounted below or above the center mount.  This allows the kit to work on stock height trucks or above on lifted trucks to give the most possible ground clearance.  This keeps the shocks away from road debris and obstacles.  The outer mounts are built from heavy duty 3/8" plate to prevent them from deforming when tightening down the ubolts.


Bilstein 5100:  These stabilizers offer a high quality, affordable shock.  Steel body with zinc plated finish.  Featuring a gas over hydraulic design to prevent fade in any environment.  Comes with removable black boots.

Fox 2.0 IFP:  2.0" Metal impacted 6061-T6 aluminum body construction for long term protection from rust.  Internal IFP mono-tube reservoir design separates oil from nitrogen charge.  Black anodized billet end caps and components.  Redundant seals, wiper seals, and scraper seals give this excellent longevity and durability.

King 2.0-  Aluminum 2.0 body construction with blue anodized billet aluminum end caps and components.  Hard chromed HD 3/4" diameter shafts for extra strength.  Special urethane seals for long life and durability.  High tolerance precision components for long life and consistent performance.  These are custom valved for our application.  These are also rebuild-able and serviceable!

PLEASE NOTE THAT THERE MAY BE MODIFICATIONS NEEDED TO ATTACH THE CENTER MOUNT TO THE DIFFERENTIAL COVER IF YOU ARE RUNNING AN AFTERMARKET COVER.  WE HAVE DESIGNED THE BRACKET TO HAVE AS MUCH CLEARANCE AT THIS LOCATION TO REDUCE  THE AMOUNT OF MODIFICATION NEEDED TO MAG HYTEC AND OTHER SIMILAR COVERS.  HOWEVER SOME GRINDING/MILLING WILL PROBABLY BE NEEDED.

Kit includes:

(1) Center mount
(1) Backside clamp
(2) Stabilizers
(2) Outer mounts
(4) Ubolt clamps
(1) Hardware kit
Customer Reviews
Rating HD Dual Stabilizer
 
i purchased this with my Trackbar a few days ago and i have to say this kit is AWESOME!. When it arrived it was forecasted heavy rain/ possible flooding. But as you know when you get new toys they must be installed. This took about thirty minutes to install. Directions were straight forward and the parts quality looked as though they belonged on the space shuttle. Very easy and direct, no issues with install. took it for a spin and voila, shimmy/ vibration gone and steering feels a tad bit tighter. Thank PMF. Another quality part and a job well done.
  Did you find this helpful?    13 of 13 Found Helpful
Reviewed by:  from San Diego. - 1/8/2016
5/5
Rating Great product and service
 
Ordered the dual stabilizer kit because I just wanted to make the front end last longer. Once I got it I had a couple questions and all were answered right away. Parts are high quality and very easy to install. I highly recommend this to anyone even if you are running everything else stock.
  Did you find this helpful?    6 of 6 Found Helpful
Reviewed by:  from Wisconsin. - 9/4/2015
5/5
Rating Quality Product For Sure!
 
This product is custom fabricated with stout materials. Customer service was good. It took me about 30 minutes to have this kit mounted on my rig. I still have the original FX4 package shocks on my 2011 F250 and this kit reduced the roughness significantly (next up is some new shocks). I would definitely recommend to anyone with a big truck.
  Did you find this helpful?    3 of 3 Found Helpful
Reviewed by:  from Oklahoma. - 10/15/2015
5/5
Rating awesome set up
 
dual stabilizer mount kit well made and perfect fit for my 2011 F350. Has taken out the death wobble which I had eliminated up to a month ago. Bilsteins all around (bad rears can be a huge contributor to the problem.) 45 minutes start to finish on the ground. Thanks gentlemen.
  Did you find this helpful?    1 of 1 Found Helpful
Reviewed by:  from buffalo, ny. - 4/16/2017
5/5
Rating dual srabilizer
 
I had searched every possible option for a really good dual steering stabilizer with the bilstein stabilizers..I just wasn't pleased with anything I found.. every kit had something about it I didn't like. after a recent order on rear lift blocks from PMF,i took a look at their stabilizer kit.i was impressed with what I saw and read. so I got one. installation was straight forward. the quality & heavier metal used was so superior to anything I had seen or used in the past. I even left my stock mounted bilstein stabilizer on the truck .it all worked beautifully together. though I had no real bump steer issues I just wanted to be a solid as possible & I got my wish. the truck steers great & the ride diffetence with my 4 inch lift is just fantastic. the kit looks great installed . I highly recommend this set up over anything else made . use caution if you use your stock mounted stabilizer in conjunction as I did , make sure the steering return is as it should be. the only downside is that I wish I had found trevor at PMF, much sooner.. owning many 4x4's in the past I know what good quality is & so far every part from PMF, is just far superior to any other similar part . I can not stress how much i recommend PMF enough . give them a try, you will not regret it.
  Did you find this helpful?    1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from baker , louisiana. - 7/10/2016
5/5
Related Items
2005-17 Ford F-250/350 Moog Heavy Duty Driver Side Tie Rod
2005-17 Ford F-250/350 Moog Heavy Duty Driver Side Tie Rod
Average Rating 0 Review(s)
Your Price: $119.00
Ford F-450/550 Fabricated Lift Blocks
Ford F-450/550 Fabricated Lift Blocks
Average Rating 0 Review(s)
Your Price: $125.00
Ford S/S Braided Brake Lines
Ford S/S Braided Brake Lines
Average Rating 4 Review(s)
Your Price: $179.99
On sale: $152.99 On Sale
2005-16 Ford F-250/350 BMC Spacer
2005-16 Ford F-250/350 BMC Spacer
Average Rating 0 Review(s)
Your Price: $129.99
HD Single Piece Draglink
HD Single Piece Draglink
Average Rating 3 Review(s)
Your Price: $399.00
On sale: $299.99 On Sale
Inverted Ubolt Adjustable Alignment Pin Top Plates
Inverted Ubolt Adjustable Alignment Pin Top Plates
Average Rating 0 Review(s)
Your Price: $49.99
Browse Similar Items