Precision Metal Fabrication
Shopping CartShopping Cart -0item(s)/Total: $0
Home > Dodge > 2500/3500 > 3rd Gen. '03-09

Gen 3 Dodge Fabricated Lift Blocks

Part Number PMF-D3-FBLK-
review 0 Review(s)
Gen 3 Dodge Fabricated Lift Blocks
Generic pic shown, actual lift blocks will vary.
Email a friend Email a friend
Review this item Review this item
Your Price:  
Choose Options
Block Height
Block Taper
Bumpstop Tangs [+$35.00]
  Our heavy duty lift blocks incorporate the u-bolts for an extremely solid and secure setup. You will never have to worry about your block shifting around, or worse yet a failure.  Many aftermarket lifts make you stack multiple blocks which not only looks bad but could allow one to be spit out.  Replace them with one of our blocks to prevent any worry!

We also make these in 1/2" increments which allows you to set the stance of your truck EXACTLY how you want it!  All blocks are fabricated from 1/4" and hand welded to ensure every set that leaves here is perfect!

All blocks have multiple pin locations to allow you to move the location of your axle.  This is needed sometimes to allow you to center your axle within the fender-well.  If you need to make use of this option, you will need to order our Adjustable Ubolt Top Plates aswell.

To order simply select the size of the block that you would like to order.  This is the height of the block in the center directly over the axle. 

Then select the pinion angle you would like.  This is the angle or taper of the block to help align your driveshaft.  Typically with the taller the lift height, the more taper you will need.

Bumpstops are optional on all blocks.  This is the tang that sticks out on the side of the block and makes contact with the bumpstop on the bottom of your frame rail.  With some lifted applications these are not functional because the tire will hit the body before the bumpstops come into effect.

We also offer custom length and larger diameter ubolts.  We bent them in house which allows us to make virtually any length you would like.  If you order 3/4" ubolts, they will automatically include new top plates aswell!  These ARE NOT included with the blocks, please view our other items if you need them!

Most sizes are built to order and will have a 7-10 lead time.  If you have any questions or need to check stock/expedite an order, dont hesitate to shoot us a call!
Related Items
Fabricated Unitized Floating Traction Block
Fabricated Unitized Floating Traction Block
Average Rating 2 Review(s)
Your Price: $700.00
1999-16 Ford F-250/350 PMF Single Traction Bar Kit
1999-16 Ford F-250/350 PMF Single Traction Bar Kit
Average Rating 4 Review(s)
Your Price: $500.00
Adjustable Alignment Pin Ubolt Top Plates
Adjustable Alignment Pin Ubolt Top Plates
Average Rating 0 Review(s)
Your Price: $49.99
Ford.1999-2010 F-250/350 Ubolts
Ford.1999-2010 F-250/350 Ubolts
Average Rating 0 Review(s)
Your Price: $75.00
Browse Similar Items