These are listed as length over stock. Long travel or systems with addition droop should order additional length lines to accommodate this. We can custom make any length line you would like for an additional cost.
Every single line is Hydrotested to 4,500 psi for 1 min. Standard rated working pressure is 1,750 psi with a 7,000 psi burst pressure.
***These lines are designed for 4x4 applications***
THESE ARE FRONT AND REAR COMPLETE KITS. KIT INCLUDES 3 LINES UNLESS OTHERWISE NOTED. THESE 3 LINES CONSIST OF THE FRONT L/R FROM THE FRAME TO THE CALIPER, AND THE REAR LINE FROM THE FRAME TO THE T BLOCK ON THE TOP OF THE AXLE.
*The 1980-97 brake line kits have multiple caliper and line configurations. Select the "Upward Banjo" line set for brake calipers/lines where the line comes out the side of the banjo bolt and bends upwards. Select the "Side Banjo" line set for calipers where the line comes out the side of banjo bolt.
***We typically have all listed configurations and sizes instock in the smoke color. Please note that other colors are made to order and will have a 4-6 week lead time typically. For more accurate turn around times and to see if the size/configuration you want is instock, please contact us by phone at (520)465-7971***